7 1140 13 Rollix Slewing Ring Bearings
| Brand Name: | Rollix |
| Model Number: | 7 1140 13 |
| da: | 170 mm |
| db: | 158.75 mm |
| dc: | 134.938 mm |
| Da: | 309.999 mm |
| Ca: | 95.809 mm |
| A1: | 171.45 mm |
| A2: | 247.65 mm |
| S: | 4.763 mm |
Product Details
| da | 170 mm |
| db | 158.75 mm |
| dc | 134.938 mm |
| Da | 309.999 mm |
| Ca | 95.809 mm |
| A1 | 171.45 mm |
| A2 | 247.65 mm |
| S | 4.763 mm |
| ba | 74.612 mm |
| H | 360.363 mm |
| H1 | 179.4 mm |
| H2 | 69.85 mm |
| L | 628.65 mm |
| R1 | 115.888 mm |
| R2 | 37.306 mm |
| RG | 3/4 NPT |
| PG | 1/4 NPT |
| h | 54.769 mm |
| Housing | SSAFS 234 |
| Stabilizing ring | SR-34-0 |
| Labyrinth ring (db shaft position) | LOR 161 |
| PosiTrac Plus contact element (db shaft position) | B10724-161 |
| Labyrinth ring (dc shaft position) | LOR 148 |
| PosiTrac Plus contact element (dc shaft position) | B10724-148 |
| End plug (suffix Y) | EPR 19 |
| Max. speed for PosiTrac Plus seal | 760 r/min |
| P60° | 345 kN |
| P90° | 207 kN |
| P120° | 127 kN |
| P150° | 113 kN |
| P180° | 113 kN |
| Pa | 73.4 kN |
| Mass pillow block | 160 kg |
| Cap bolt | 1-8 UNC |
| Cap bolt recommended tightening torque | 1220 N·m |
| Cap bolt, SAE grade | 8 |
| Eye bolt | 2 x 3/8-16 UNC |
| Initial grease fill | 878.85 g |