7 077 Rollix Slewing Ring Bearings
| Brand Name: | Rollix |
| Model Number: | 7 077 |
| da: | 41.275 mm |
| Da: | 110 mm |
| Ca: | 50.8 mm |
| A1: | 69.85 mm |
| A2: | 115.888 mm |
| ba: | 27.781 mm |
| H: | 147.637 mm |
| H1: | 76.2 mm |
Product Details
| da | 41.275 mm |
| Da | 110 mm |
| Ca | 50.8 mm |
| A1 | 69.85 mm |
| A2 | 115.888 mm |
| ba | 27.781 mm |
| H | 147.637 mm |
| H1 | 76.2 mm |
| H2 | 28.575 mm |
| J min. | 196.85 mm |
| J max. | 228.6 mm |
| L | 269.875 mm |
| N1 | 19.05 mm |
| R1 | 42.862 mm |
| R2 | 19.05 mm |
| RG | 1/8 NPT |
| PG | 1/8 NPT |
| h | 36.513 mm |
| Housing | SAF 610 |
| Stabilizing ring | 2 x SR-1610 |
| Labyrinth ring | 2 x LER 19 |
| End plug (suffix Y) | EPR 4 |
| Bearing limiting speed | 8000 r/min |
| P60° | 39.1 kN |
| P90° | 23.6 kN |
| P120° | 14.2 kN |
| P150° | 12.9 kN |
| P180° | 15.6 kN |
| Pa | 4.07 kN |
| Mass pillow block | 10 kg |
| Cap bolt | 2 x 1/2-13 UNC |
| Cap bolt recommended tightening torque | 149.1 N·m |
| Cap bolt, SAE grade | 8 |
| Appropriate attachment bolt size G | 0.625 in |
| Initial grease fill | 107.73 g |