25 0641 01 Rollix Slewing Ring Bearings
| Brand Name: | Rollix |
| Model Number: | 25 0641 01 |
| da: | 130 mm |
| db: | 149.225 mm |
| dc: | 125.412 mm |
| Da: | 230 mm |
| Ca: | 73.787 mm |
| A1: | 130.175 mm |
| A2: | 203.2 mm |
| S: | 4.763 mm |
Product Details
| da | 130 mm |
| db | 149.225 mm |
| dc | 125.412 mm |
| Da | 230 mm |
| Ca | 73.787 mm |
| A1 | 130.175 mm |
| A2 | 203.2 mm |
| S | 4.763 mm |
| ba | 57.944 mm |
| H | 292.1 mm |
| H1 | 152.4 mm |
| H2 | 60.325 mm |
| L | 466.725 mm |
| R1 | 79.375 mm |
| R2 | 36.513 mm |
| RG | 1/2 NPT |
| PG | 1/4 NPT |
| h | 59.531 mm |
| Housing | SSAFS 226 |
| Stabilizing ring | SR-26-0 |
| Labyrinth ring (db shaft position) | LOR 136 |
| PosiTrac Plus contact element (db shaft position) | B10724-134 |
| Labyrinth ring (dc shaft position) | LOR 122 |
| PosiTrac Plus contact element (dc shaft position) | B10724-122 |
| End plug (suffix Y) | EPR 27 |
| Max. speed for PosiTrac Plus seal | 980 r/min |
| P60° | 308 kN |
| P90° | 185 kN |
| P120° | 125 kN |
| P150° | 118 kN |
| P180° | 151 kN |
| Pa | 98.3 kN |
| Mass pillow block | 81.2 kg |
| Cap bolt | 3/4-10 UNC |
| Cap bolt recommended tightening torque | 515.2 N·m |
| Cap bolt, SAE grade | 8 |
| Eye bolt | 3/8-16 UNC |
| Initial grease fill | 765.45 g |